EINHELL TC-MS 2513 L User Manual

TC-MS 2513 L
8
BR Manual de instruções original
Serra de corte transversal e
meia-esquadria
E Manual de instrucciones original
Sierra Ingletadora
GB Original operating instructions
Crosscut and miter saw
South America
Atenção!
Este manual de instruções foi criado para ambas às versões do aparelho: 127 V e 220 V.
Atenção!
O aparelho, no entanto foi desenvolvido somente para uma única voltagem: ou 127 V, ou 220 V.
Assim, verifi que a voltagem do mesmo antes de conectá-lo à tomada de energia elétrica.
Anl_TC_SM_2513_L_SPK8.indb 1Anl_TC_SM_2513_L_SPK8.indb 1 15.10.15 09:5015.10.15 09:50

EINHELL TC-MS 2513 L Specifications

General

Power	1600 W
Blade Diameter	250 mm
Idle speed	5000 min^-1
Saw Blade Bore	30 mm
Saw blade	250 x 30 mm
Swiveling range	0° - 45°
Mitre cut	0 - 45°
No-load Speed	5000 rpm

Summary

Safety Warnings and Precautions

General Safety Advice

Essential advice to reduce the risk of injury and damage during equipment use.

Safety Regulations

Safety Instructions

Follow instructions to reduce risk of fire, electric shock, and personal injury.

Special Information About the Laser

Precautions for laser radiation safety and avoiding eye injury.

General Safety Rules

Detailed Safety Regulations

Tool Maintenance and Handling

Special Safety Information

Safe Operation Procedures

Proper Use

Intended Use and Limitations

Defines the equipment's purpose and restrictions, including material types.

Before Starting the Equipment

General Information

Operation

90° Cross-cuts and 0° Rotary Table

Guide for performing straight crosscuts with the rotary table at 0 degrees.

90° Cross-cuts and 0°-45° Rotary Table

Instructions for making 90-degree crosscuts with angled rotary table settings.

Mitre Cuts 0°-45° and Rotary Table 0°

Steps for making angled mitre cuts with the rotary table at 0 degrees.

Mitre Cuts 0°-45° and Rotary Table 0°-45°

Guide for performing double mitre cuts using both angled adjustments.

Replacing the Saw Blade

Detailed procedure for safely changing the saw blade.

Replacing the Power Cable

Cleaning, Maintenance and Ordering of Spare Parts