Need help?Do you have a question about the EINHELL TC-MS 2112 and is the answer not in the manual?
General| Blade diameter | 210 mm |
|---|---|
| Cutting capacity 90° x 90° | 120 x 55 mm |
| No-load speed | 5000 rpm |
| Mitre cut | 45 ° - 45 ° |
| Swivel range | 45 ° - 45 ° |
Read instructions, wear hearing, respiratory, and eye protection; avoid blade contact.
Maintain a safe work area and use appropriate personal protective equipment.
Follow guidelines for tool handling, maintenance, and safe operation.
Use correct, sharp, undamaged blades suitable for the material.
Wear ear plugs, masks, and gloves as needed for protection.
Ensure correct blade rotation, secure workpieces, and avoid overloading.
Follow safety rules for adjustments, cleaning, and power disconnection.
Identify all parts of the saw and included accessories.
Verify completeness and condition of received items.
Use only for specified wood cutting; not for firewood or industrial use.
Ensure correct power, fitted guards, and smooth-moving parts.
Guides for 90° crosscuts and angled mitre cuts.
Clean exterior, check/replace carbon brushes, lubricate moving parts.
Specify unit type, article number, ID, and part number for orders.
Dispose of the tool and packaging responsibly according to local regulations.
Store in a dark, dry, frost-free location, inaccessible to children.
To Next Page
