EINHELL TE-SM 2534 Dual User Manual

GB
- 30 -
Service information
We have competent service partners in all countries named on the guarantee certi cate whose contact
details can also be found on the guarantee certi cate. These partners will help you with all service re-
quests such as repairs, spare and wearing part orders or the purchase of consumables.
Please note that the following parts of this product are subject to normal or natural wear and that the
following parts are therefore also required for use as consumables.
Category Example
Wear parts* Carbon brushes
Consumables* Saw blade
Missing parts
* Not necessarily included in the scope of delivery!
In the eff ect of defects or faults, please register the problem on the internet at www.isc-gmbh.info. Ple-
ase ensure that you provide a precise description of the problem and answer the following questions in
all cases:
•
Did the equipment work at all or was it defective from the beginning?
•
Did you notice anything (symptom or defect) prior to the failure?
•
What malfunction does the equipment have in your opinion (main symptom)?
Describe this malfunction.
Anl_TE_SM_2534_Dual_SPK9.indb 30 24.10.2019 12:03:43

EINHELL TE-SM 2534 Dual Specifications

General

Idle speed (max)	5100 RPM
Miter setting (left)	45 °
Input power	1800 W
Power source	AC
Cutting capacity 0°	340 mm
Cutting capacity 45° miter	180 x 47 mm
Blade diameter	250 mm
Dust bag included	Yes

Weight and Dimensions

Depth	901 mm
Width	614 mm
Height	361 mm
Weight	15650 g