To Next PageTo Next Page
Need help?Do you have a question about the EINHELL TH-CD 12-2 Li and is the answer not in the manual?
General| Soft grip | Yes |
|---|---|
| Chuck type | Keyless |
| Product design | Pistol grip drill |
| Number of gears | 2 |
| Torque settings | 20 |
| Chuck capacity (max) | 10 mm |
| Idle speed (1st gear) | 350 RPM |
| Idle speed (2nd gear) | 1300 RPM |
| Maximum torque (hard applications) | 24 N⋅m |
| Product color | Black, Red |
| Power source | Battery |
| Charging time | 300 min |
| Battery voltage | 12 V |
| Battery capacity | 1.3 Ah |
| Number of batteries included | 1 pc(s) |
Weight and Dimensions| Depth | 280 mm |
|---|---|
| Width | 220 mm |
| Height | 79 mm |
| Weight | 1000 g |
| Package weight | 1940 g |
Read all safety regulations and instructions to prevent electric shock, fire, or serious injury.
Outlines potential hazards like lung/hearing damage and hand-arm vibration, advising protective measures.
Step-by-step instructions for charging the battery pack, including troubleshooting tips.
How to set torque for screwing and adjust for drilling, including cautions.
Explanation of the changeover switch for rotation and the On/Off switch for speed control.
Process for changing bits and advice for successful screwing operations.
Explains how to use the selector switch to change speed gears and the caution against changing gear while in motion.
