18
4 POWER-SAVE SETUP
Set-up Procedure
Set the monitor’s power-save environment to match the PC’s ScreenSaver
software.
• For the PC setup, please refer to the user’s manuals for the PC and
graphics board.
There are two power-save settings for the monitor.
‘VESA DPMS’ system works with the VESA DPMS signal.
‘NUTEK’s system works with a screen saver software and Energy Saver
for Macintosh which blanks the screen (totally black screen).
Set the monitor to match the PC’s power-saving software, as follows.
Monitor setting for matching the PC:
PC PC Power saving Monitor setting
PC/AT and compatibles VESA DPMS (Signal) VESA DPMS
(VESA DPMS activated)
PC/AT and compatibles Windows NUTEK
(VESA DPMS (Control Panel/Desktop/
inactivated) ScreenSaver: "Blank Screen"
Macintosh Energy Saver NUTEK
ScreenSaver software NUTEK
After Dark/"Blank" settings
To Next Page
Loading...
