EK Quantum PC-O11D XL D5 PWM D-RGB User Manual

USER GUIDE
DISTRIBUTION PLATE
EKQuantum
Reflection PC-O11D XL D5 PWM D-RGB

EK Quantum PC-O11D XL D5 PWM D-RGB Specifications

General

Brand	EK
Model	Quantum PC-O11D XL D5 PWM D-RGB
Category	Computer Hardware
Language	English

Summary

Box Contents

Preparing the 011D XL Chassis

Step 1 - Remove Top Panel

Unscrew factory screws and remove the top panel from the chassis.

Step 2 - Remove Side and Front Panels

Remove both side panels and the front panel from the PC case.

Step 3 - Remove SSD Trays

Remove SSD trays from the back side of the chassis as required.

Step 4 - Remove Bottom Fan/SSD Tray

Remove the fan/SSD tray from the bottom of the case for easier installation.

Installing the Distribution Plate in the 011D XL

Step 1 - Position Distribution Plate

Carefully place the distribution plate into the PC case and align mounting holes.

Step 2 - Secure Plate with Bracket

Secure the distribution plate to the chassis using the provided mounting bracket and nuts.

Step 3 - Attach Front Mounting Bracket

Position and secure the front mounting bracket onto the distribution plate.

Recommended Distribution Plate Configurations

Connecting the D-RGB LED Strip

Connecting the Pump

Testing the Loop

Support and Service

Social Media