Need help?Do you have a question about the Ekahau B4 and is the answer not in the manual?
Step-by-step guide to install the required tag configuration software.
Outlines the necessary steps to activate tags for network communication.
Setting the RTLS Controller IP address and network parameters in the Activator.
Inputting Wi-Fi network SSID, security type, and key.
Defining IP addressing method (DHCP or Static) for tag network configuration.
Final step to initiate the tag activation process using the Activator software.
How to configure tags using the Ekahau RTLS Controller's settings page.
How tag button presses trigger location updates and maintenance calls.
Using the safety switch to initiate location updates and send alerts.
To Next Page
General