5
Optional – if a CP IN was installed, a suitable mounting plate:
101905 ekey mounting plate round-cut 20 x 272 mm
101906 ekey mounting plate round-cut 24 x 272 mm
101907 ekey mounting plate square-cut 20 x 272 mm
101908 ekey mounting plate square-cut 24 x 272 mm
Note: Use the correct faceplate depending on the faceplate width of the CP IN.
You must replace the ekey home nger scanner integra including the design element and
the respective control panel, CP IN or CP micro.
The wiring, the cable transfer and the motorized lock remain from the existing ekey system (ekey home).
What other parts do you need?
What do you have to replace?
What can remain in the door?
YOUR FINGER. YOUR KEY.
To Next Page
Loading...
