EasyManua.ls Logo

EKKO EB12E Series - 6.Battery charging and replacement; 6.1. replacement; 6.2. Power meter

EKKO EB12E Series
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 12 -
- 12 -
- 12 -
When you meet the emergency, press the emergency stop switch (2). All electrical functions
will stop. Keep a safe distance.
6.Battery charging and replacement
1/ Only qualified personnel for repair or to recharge the battery. Please be sure to abide by the
operation manual and battery manufacturer's instructions.
2/ These batteries are maintenance free, prohibited to fill.
3/ Battery recycling shall abide by state laws and regulations. Please abide by these
provisions.
4/ Treatment of the battery, the prohibition of the use of fire, gas may cause an explosion!
5/ Battery charging region forbid storing flammable materials or flammable liquids. Smoking
is prohibited, and the region must ensure that good ventilation.
6/ Start charging or install replace the battery before you park the vehicle safety.
7/ Perform maintenance work before, wiring harness is connected correctly and to other parts
of the vehicle without interference.
8/ The car is equipped with the sealing liquid acid battery 2*12V/ 100Ah.
9/ Only allow the use of sealed lead-acid battery weight will have a certain impact on the
operation of the vehicle behavior.
Note: Please consider the maximum operating temperature of the battery.
6.1. replacement
Safety park vehicles, with a key (16) close the stacker and press the emergency stop switch
(2). Unscrew the 2 screws on the main cover, remove the main outer cover. First unscrew the
6.2. Power meter
Discharge with 4 LED display to show

Other manuals for EKKO EB12E Series

Related product manuals