To Next Page

To Previous Page

INSTALLING OUTDOOR CAMERA

1. Locate area you wish to install camera and mark the 3

holes of the base of the camera with a pencil.

2. Then drill 3 x holes with a drill bit size just slightly smaller

than the plugs (A). When you lightly hammer in the plugs

(A), they will ﬁt securely.

3. Then line up the camera base holes and use the screws (B)

provided to screw camera into the wall (plugs).

4. You can use the alen key provided to tighten the angles

of the camera ﬁx your desired angle.

A B

1 2

Questions and Answers:

Need help?

Do you have a question about the EKO HOME SECURITY KIT and is the answer not in the manual?

EKO HOME SECURITY KIT Specifications

General