What to do if the EKO Subwoofer remote control does not work?
If the EKO Subwoofer remote control isn't working, first select the correct INPUT mode before pressing any buttons. Try reducing the distance between the remote and the unit, ensuring you're aiming directly at the sensor on the front. Also, make sure the battery is correctly inserted with the polarities (+/-) aligned, and replace the battery if necessary.
How to fix EKO KSB212WDA when there is no power?
If your EKO Subwoofer has no power, ensure the AC plug is securely connected to the power socket and that there is power at the outlet. Also, make sure to press the standby button to turn the unit on.
What to do if EKO KSB212WDA Subwoofer has no response?
If your EKO Subwoofer is not responding, disconnect and then reconnect the AC power plug. After that, turn the unit on again.
Why can’t I find the Bluetooth name of EKO KSB212WDA on my device?
If you can't find the Bluetooth name of your EKO Subwoofer on your Bluetooth device, first ensure that the Bluetooth function is activated on your device. Also, verify that you have paired the unit with your Bluetooth device.
Instructions for positioning the Dolby Atmos Soundbar on a TV unit for optimal airflow and sound.
Placement guidelines for the subwoofer on the left or right side of the TV unit on a stable surface.
Connecting the soundbar to a TV via HDMI cable for audio output, including ARC feature.
Connecting the soundbar to a TV using an optical cable for audio transmission.
Steps for powering the soundbar on and off using the unit or remote control.
General| Type | Active Subwoofer |
|---|---|
| Power Output | 120W RMS |
| Enclosure Type | Bass Reflex |
| Driver Size | 12 inch |
| Impedance | 4 Ohms |
| Inputs | RCA |
To Next Page