Why is water coming out of my EKOM Air Compressor?
If water is coming out of the outlets of your EKOM Air Compressor, the water trap in the filter and filter regulator is likely dirty. You should clean or replace the water trap.
How to troubleshoot an EKOM DK50 DE Air Compressor that won't start?
If your EKOM Air Compressor isn't starting, there could be a few reasons related to the electrical power source. First, ensure the main breaker is on. Then, check the voltage in the socket and inspect the fuses, replacing any that are faulty. Also, make sure the terminal is tightened and the electrical cord isn't defective; replace it if necessary. If these steps don't resolve the issue, consider replacing the motor or capacitor, or replacing any other damaged parts.
Why is the output pressure low on my EKOM Air Compressor?
Low output pressure in your EKOM Air Compressor can stem from several causes. First, check and adjust the working or output pressure settings to the correct levels. Also, inspect the compressed air distribution system for leaks and seal any loose joints. Avoid exceeding the maximum flow specified in the Technical Data. If these steps don't help, you may need to replace the piston assembly or a contaminated element.
What to do if my EKOM Air Compressor has low performance?
If your EKOM Air Compressor's performance is low, start by checking the working and output pressure settings and adjust them as needed. Look for air leaks in the compressed air distribution system and seal any loose joints. Ensure that you are not exceeding the maximum flow specified in the Technical Data. If the problem persists, you might need to replace worn piston rings or a contaminated element.
Why did the thermal motor protection trip on my EKOM Air Compressor?
If the thermal motor protection has tripped on your EKOM Air Compressor, it could be due to a few reasons. Check if the ventilation openings are covered and uncover them. Ensure the cooling fans are working; if not, replace the defective fan. Also, make sure the equipment is in a well-ventilated space to secure suitable conditions. If these steps don't resolve the issue, consider replacing any damaged parts.
General| Number of outputs | 1 |
|---|---|
| Air flow | 50 l/min |
| Power | 0.55 kW |
| Max Pressure | 8 bar |
| Voltage | 230 V |
| Weight | 26 kg |
| Type | Oil-free compressor |
To Next Page
