- 10 - - 11 -
INSTALLING THE ASSEMBLY
USING A PUMP BRACKET*
EK-Loop UNI
Pump Reservoir
Bracket
M4 PVC Washer
M4 x 10 DIN7984
*an optional step; the pump bracket is sold separately
If you have an option to mount the assembly on
120/140mm fan or 120/140mm fan mounting holes,
EK recommends using the EK-Loop UNI Pump
Reservoir Bracket.
Secure the EK-Quantum Inertia D5 PWM D-RGB
onto the EK-Loop UNI Pump Reservoir Bracket using
the enclosed M4 x 10 DIN7984 screws and M4 PVC
washers (as shown in the image).
To Next Page
Loading...
