Need help?Do you have a question about the ekwb EK-Quantum Inertia D5 PWM and is the answer not in the manual?
General| Brand | ekwb |
|---|---|
| Model | EK-Quantum Inertia D5 PWM |
| Category | Water Pump |
| Language | English |
Lists components included in the pump's packaging, such as Allen keys and mounting hardware.
Provides essential advice for users, emphasizing reading the manual and using quality coolants.
Details the hardware for mounting the pump, including screws and washers.
Explains the step-by-step process of assembling the pump motor with the main unit.
Illustrates acceptable and unacceptable mounting positions for the pump assembly.
Describes how to attach the pump assembly to a PC chassis using an optional pump bracket.
Guides on connecting water cooling tubes via G1/4 threaded ports, specifying inlet and outlet.
Details how to connect the pump's power (Molex) and control (PWM Fan) cables.
Explains how to connect the pump's RGB lighting to the motherboard header.
Recommends a 24-hour leak test procedure for the completed cooling loop.
To Next Page
