Safety
Instructions
1.
General
information
• Please
read and
follow
these safety instructions.
•
Keep them safe for future reference.
•
Observe
all
warnings on the speaker and
in
the
manual.
Please check the speaker for damage
before use. The speaker must be
in
perfect working condition. Damaged parts may
lead
to
personal
injury.
2.
Use
only
as
directed
•
Connect the speaker(s) according to the instructions
in
the
manual.
•
Many ELAC speakers are equipped with spikes and/or anti-slip feet. They are
explicitly provided for
levelling the speaker. For
levelling
on
an
uneven floor,
unscrew the spikes or
anti-slip
feet by 2-3
turns
of
thread. The speaker should
always
be
in
perfect vertical alignment: the
stability
of
the
speaker must not be compromised by using spikes
or
anti-slip feet
as
the speaker may tip-over.
3.
Location
• Install the speakers on a
level
surface
only
•
When choosing the location
of
these speakers do not place them
in
locations that are:
•
In
direct sunlight
•
Very humid
•
Prone
to
vibrations
• Exceptionally
hot
or
cold
•
Near
CRT
Televisions (the speakers are not magnetically shielded and may cause
color
issues with a
CRT
based
TV)
• Close
to
magnetic cards (Since the speakers are not magnetically shielded
placing
magnetic cards such
as
credit cards
or
commuter cards may cause them to fail).
WARNING!
Please
ensure
the
product
is
perfectly
stable
to
avoid
injury
from tip-over.
Please note, that stability can be increased by using spikes on carpeted surfaces. However, the
mounting
of
spikes must be carried
out
carefully
due to their very sharp ends which may cause injuries.
The stability on slippery
floors can be increased by using Velcro
fastening tape or double-sided
adhesive tape. Do not
install
the speaker near any heat sources such
as
radiators, heating
valves,
stoves,
or
other apparatus (including amplifiers) that produce heat, or
in
areas where there
is
a risk
of
explosion.
•
Do
not
block any ventilation openings.
Install
in
accordance with the manufacturer's instructions.
•
Do
not
install
the speaker
in
a closed rack
or
in
a
closed
cupboard.
•
Do not put burning candles
on
or
near the speaker.
•
Do
not
install
the speaker near transformers because electromagnetic stray fields
can cause hum
noise on woofers.
•
In
combination with certain
materials
I
lacquers
I
material
surfaces,
anti-slip
feet
or
spike washers
may cause
colored
imprints on the surfaces.
ELAC Uni-Fi Speakers
I
www.elac.com
I
Page 2
To Next Page
Loading...
Need help?
General
