Need help?Do you have a question about the ELAC A4 and is the answer not in the manual?
General| Impedance | 6 Ohms |
|---|---|
| Tweeter | 1-inch silk dome |
| Crossover Frequency | 5, 000 Hz |
| Sensitivity at 2.83 v/1m | 85dB |
| Sensitivity | 85 dB |
| Weight | 4.4 lb / 2.0 kg |
| Cabinet finish | Black ash vinyl |
| Height | 4.92 in / 125 mm |
| Net weight | 4.4 lb / 2.0 kg |
Read and follow safety instructions, keep them safe, and check speaker for damage before use.
Connect speakers as directed, use spikes/anti-slip feet for leveling, and install on a level surface.
Avoid placing speakers in direct sunlight, humid, hot, or near CRT TVs or magnetic cards.
Avoid extreme volume and unattended overload to prevent damage or injury.
Do not open for service. Clean with soft cloth only. Servicing by qualified personnel.
Dispose of packaging and speakers environmentally according to local legislation.
ELAC's commitment to high standards and best-in-class sound quality.
Unbox carefully, use correct wire gauge, ensure correct polarity, and keep equipment off.
New technology adding height to home theater audio, adapting to speaker configurations for immersion.
Optimal placement at ear height; ideal ceiling height 7.5-12 ft with reflective surfaces.
Designed for Dolby Atmos, matches ELAC Debut speakers, follows Dolby guidelines for true experience.
Sit on top of existing speakers, angled to ceiling for reflected sound. Avoid obstructions.
Details setups using one or two pairs of A4s for front and rear height channels.
Placement options and receiver/amplifier instructions for wiring and level setting.
Details enclosure type, woofer, tweeter, frequency response, impedance, finish, dimensions, and weight.
3-year warranty for defects/workmanship, free repair/replacement of parts; shipping is owner's responsibility.
Valid for home use, excludes modification/abuse. Contact ELAC for service with proof of purchase.
For claims outside US/Canada, contact the local dealer or distributor in the country of purchase.
To Next Page
