7
RISK GROUP 3 - RISK OF EXPOSURE TO ULTRAVIOLET UV
RADIATION! FIXTURE EMITS HIGH INTENSITY WAVELENGTH
OF ULTRAVIOLET UV LIGHT FROM THE UV LED. WEAR PROPER
EYE AND SKIN PROTECTION. AVOID PROLONGED PERIODS
OF EXPOSURE TO UV LED. AVOID WEARING WHITE COLOR
CLOTHING AND/OR USING UV PAINTS ON SKIN. AVOID DIRECT
EYE AND/OR SKIN EXPOSURE AT DISTANCES LESS THAN 11
FEET (3.3m).
DO NOT OPERATE FIXTURE WITH DAMAGED/MISSING
EXTERNAL COVERS. DO NOT LOOK DIRECTLY INTO THE UV
LIGHT AND/OR VIEW UV LIGHT DIRECTLY WITH OPTICAL
INSTRUMENTS THAT MAY CONCENTRATE THE LIGHT/
RADIATION OUTPUT. INDIVIDUALS SUFFERING FROM A RANGE
OF EYE CONDITIONS, SUNLIGHT EXPOSURE DIS-ORDERS, OR INDIVIDUALS USING PHOTOSENSITIVE
MEDICATION, MAY RECEIVE DISCOMFORT IF EXPOSED TO THE ULTRAVIOLET UV LIGHT EMITTED
FROM THE UV LED.
DO NOT TOUCH the xture housing during operation. Turn OFF the power and allow approximately
15 minutes for the xture to cool down before serving.
DO NOT shake xture, avoid brute force when installing and/or operating xture.
DO NOT operate xture if the power cord is frayed, crimped, damaged and/or if any of the power
cord connectors are damaged and do not insert into the xture securely with ease. NEVER force
a power cord connector into the xture. If the power cord or any of its connectors are damaged,
replace it immediately with a new one of similar power rating.
DO NOT block any air ventilation slots.
All fan and air inlets must remain clean and never blocked.
Allow approx. 6” (15cm) between xture and other devices or a wall for proper cooling.
Always disconnect xture from main power source before performing any type of service and/or
cleaning procedure. Only handle the power cord by the plug end, never pull out the plug by tugging
the wire portion of the cord.
During the initial operation of this xture, a light smoke or smell may emit from the interior of the
xture. This is a normal process and is caused by excess paint in the interior of the casing burning
o from the heat associated with the lamp and will decrease gradually over time.
Consistent operational breaks will ensure xture will function properly for many years.
ONLY use the original packaging and materials to transport the xture in for service.
SAFETY GUIDELINES
To Next Page
Loading...
