ELCOM NT-2028 User Manual

5
Scanner receiver setting
Enter setting
Setting Code Description Note
Set receiver channel
Set receiver channel:
e.g.: NT 211 = 10#,
set working channel 10.
Range: 00-15, end with #.
0#
1#
15#
Set receiver ID
Set receiver ID:
e.g.: NT 221=100#,
set transmitter ID 200.
Range: 1-254, end with #.
1#
2#
100#,
254#
Enable scanner ID
report
Display scanner ID at the
receiving end.
Disable scanner ID
report
Do not display scanner ID at
the receiving end.
Set Tab between ID
and barcode
Set the delimiter between ID
and barcode a Tab when ID
report is enabled. (Default
setting)
e.g.: scanner ID=10,
barcode= 12345;
display: 10 12345
Set White Space between
ID and barcode
Set the delimiter between
ID and barcode white space
when ID report is enabled.
e.g.: scanner ID=10,
barcode= 12345;
display: 10 12345
Set “-” between ID
and barcode
Set the delimiter between ID
and barcode a “-” when ID
report is enabled.
e.g.: scanner ID=10,
barcode= 12345;
display: 10 12345

ELCOM NT-2028 Specifications

General

Brand	ELCOM
Model	NT-2028
Category	Barcode Reader
Language	English