Eldes ESIM120 User Manual

ESIM120
GSM SWITCHGATE CONTROLLER

Eldes ESIM120 Specifications

General

Model	ESIM120
Category	Network Router
SIM Card Slot	Yes
Wi-Fi	802.11 b/g/n
Ethernet Ports	1
Power Supply	10-16 V DC
Operating Temperature	-20°C to 60°C
GSM bands	850/900/1800/1900 MHz
Inputs	SIM card
Outputs	Ethernet

Summary

SAFETY INSTRUCTIONS

TECHNICAL SPECIFICATIONS

2.1. Electrical and Mechanical Characteristics

Details supply voltage, current, GSM frequency, outputs, inputs, dimensions, and operating conditions.

2.2. Main Unit, LED Indicator and Connector Functionality

Describes the function of main unit components, LED indicators, and terminal connectors.

2.3. Wiring Diagrams

Illustrates the general wiring and specific examples for connecting the ESIM120.

INSTALLATION

CONFIGURATION METHODS

5.2. ELDES Configuration Tool Software

Introduces PC software for local or remote configuration via USB or GPRS.

SMS PASSWORD

ADMINISTRATOR PHONE NUMBERS

Set administrator phone number

How to set up to 5 administrator phone numbers for system control and notifications.

DATE AND TIME

9.1. Automatic Date and Time Synchronization

Describes automatic date/time setting via GSM network or SMS text messages.

USER PHONE NUMBER DATABASE

Add user phone number (and user name)

Instructions for adding user phone numbers and optional names for access control.

Assign output (-s) to individual user

How to grant access control for specific outputs (C1, C2) to individual users.

User Validity and Access Restriction

Assign scheduler to individual user

How to link a specific scheduler to a user for time-based access control.

Set deadline for individual user

How to set an expiry date and time for a user's access validity.

Set ring counter for individual user

OUTPUTS

Set output as NO (normally-open) or NC (normally-closed)

How to configure the output type (normally-open or normally-closed) for connected devices.

11.2. Output Control by Free of Charge Phone Call

Explains how to control outputs using free calls from authorized phone numbers.

Set output pulse duration

11.3. Output Control by SMS Text Message

How to control outputs using SMS commands from administrator phone numbers.

Turn ON output for time period

Procedure to turn an output ON for a specified duration via SMS.

Turn OFF output for time period

Procedure to turn an output OFF for a specified duration via SMS.

Turn ON output/Set output start-up state as ON

Turn OFF output/Set output start-up state as OFF

11.4. Output Control Confirmation by Call Back

11.5. Output Control from any Phone Number

How to allow output control from non-listed phone numbers.

11.6. Automatic Output Control

How to schedule outputs to turn ON/OFF automatically based on assigned schedulers.

SCHEDULERS

Select At Specified Day (-s)

Enable day (-s) of the week

Set start time

Set end time

EVENT LOG

INPUTS

Set input delay

14.1. Input Names and Alarm Notifications

14.2. Disabling and Enabling Inputs

SYSTEM INFORMATION. INFO SMS

SYSTEM NOTIFICATIONS

16.1. SMS Text Message Delivery Restrictions

16.2. SMSC (Short Message Service Center) Phone Number

How to set the SMSC number for reliable SMS delivery.

Set SMSC phone number

Procedure to manually configure the SMS center phone number for SMS routing.

GPRS NETWORK SETTINGS

Set APN

How to configure the Access Point Name (APN) for GPRS connection.

Set user name

Set password

INCOMING PHONE NUMBER VERIFICATION SETTINGS

Manage incoming phone number verification settings

REMOTE SYSTEM RESTART

Restart the system

How to remotely restart the ESIM120 device using an SMS command.

TECHNICAL SUPPORT

20.1. Troubleshooting

Provides a table of common issues, their indicators, and possible reasons for the ESIM120.

20.2. Restoring Default Parameters

Step-by-step guide to reset the device to its factory default settings.

20.3. Updating the Firmware via USB Cable

Instructions on how to update the device's firmware using a USB cable connection.

ELDESS CLOUD SERVICES

Enable ELDES Cloud Services

How to activate the cloud-based platform for remote monitoring and control.

Disable ELDES Cloud Services