Eldes ESIM120 - Turn OFF output;Set output start-up state as OFF

20
20
EN
ESIM120 Manual v.3.6
Turn OFF output/Set
output start-up state
as OFF
SMS
SMS text message content:
ssss_Co:OFF or ssss_out-name:OFF
Value: ssss – 4-digit SMS password; o – output number, range - [1... 2]; out-name – up to
16 characters output name.
Example: 1111_C2:OFF
Cong
Tool
This operation may be carried out from the PC using the ELDES Conguration Tool software.
NOTE: Output can be turned ON for a determined time period only when it is in OFF state.
NOTE: Output can be turned OFF for a determined time period only when it is in ON state.
NOTE: ELDES Conguration Tool software allows to set only the output start-up state.
NOTE: The administrator can control any output by SMS text message regardless of the output assigned to the administrator phone number
(see 8. ADMINISTRATOR PHONE NUMBERS).