Eldes ESIM120 - 11.6. Automatic Output Control

22
22
EN
ESIM120 Manual v.3.6
11.6. Automatic Output Control
The system comes equipped with automatic output control in accordance with the assigned scheduler (-s). When one or more schedulers
are assigned, the output will automatically turn ON/OFF on the specied weekdays and time set up in the scheduler. The system allows to
assign up to 8 dierent schedulers. For more details on how to set up the schedulers, please refer to 12. SCHEDULERS.
Assign scheduler
SMS
SMS text message content:
ssss_OSHEDo_c:ON
Value: ssss – 4-digit SMS password; o – output number, range [1 – output C1; 2 – output C2];
c – scheduler number; range – [1... 8].
Example: 1111_OSCHED2_1:ON
Cong
Tool
This operation may be carried out from the PC using the ELDES Conguration Tool software.
Remove scheduler
SMS
SMS text message content:
ssss_OSHEDo_c:OFF
Value: ssss – 4-digit SMS password; o – output number, range [1 – output C1; 2 – output C2];
c – scheduler number; range – [1... 8].
Example: 1111_OSCHED1_5:OFF
Cong
Tool
This operation may be carried out from the PC using the ELDES Conguration Tool software.
ATTENTION: Once the scheduler, set up for automatic output control, comes into eect, the user/administrator will NOT be able to
control the output by phone call and SMS text message.