Eldes EWD3 - Safety Instructions; Terms of Use and Warranty

13EN
EWD3 WIRELESS MAGNETIC DOOR CONTACT/SHOCK SENSOR/FLOOD SENSOR-READY
TERMS OF USE
The following terms and condiions govern use of the EWD3 device and contains important informaion on limitaions regarding the product’s use and
funcion, as well as informaion on the limitaions of the manufacturer’s liability.
Please carefully read these terms and condiions. For more informaion on your product, please visit eldesalarms.com
TECHNICAL SUPPORT
In order to ensure coninuous and proper operaion of the EWD3 device and uninterrupted service, it is the responsibility of the User to make sure that:
(I) the product is properly installed, and (II) there is constant electrical supply (low batery must be replaced in ime). If you experience diiculty during
the installaion or subsequent use of the system, you may contact “ELDES, UAB” distributor or dealer in your country/region. For more informaion
see eldesalarms.com
SAFETY INSTRUCTIONS
Please read and follow these safety guidelines in order to maintain safety of operators and people around:
• DO NOT use the device where it can cause potenial danger and interfere with other devices – such as medical devices.
• DO NOT use the device in hazardous environment.
• DO NOT expose the device to high humidity, chemical environment or mechanical impact.
• DO NOT atempt to repair the device yourself – any repairs must be carried out by fully qualiied personnel only.
• EWD3 can be powered by a single Primary 3V Lithium 1500mAh CR123A batery. When insering the batery into the batery slots, mind
the polarity terminals!
• A blown fuse cannot be replaced by the user. The replacement fuse has to be of the kind indicated by the manufacturer (fuse F1 model –
PICOSMDC050S).
• The device is not meant for outdoor use, i.e. you should use it inside a building. Protect the device against cold, heat and keep away from
direct sunlight while in storage or operaion.
WARRANTY PROCEDURES
Warranty and out of warranty service should be obtained by contacing the system integrator/dealer/retailer/e-tailer or distributor where the
customer purchased the product. When requesing for service, the proof of purchase and the product serial number must be provided. The return
of the defecive product should be strictly through the original route of purchase, and the customers shall pack the product appropriately to prevent
the returned product from sufering in the transportaion.
MANUFACTURER WARRANTY
“ELDES, UAB” warrants this system only to the original purchaser and only in case of defecive workmanship and materials under normal use of
the system for a period of twenty four (24) months from the date of shipment by the “ELDES, UAB” (Warranty Period). Warranty obligaions do
not cover expandable materials (power elements and/or bateries), holders and enclosures. The warranty remains valid only if the system is used
as intended, following all guidelines outlined in this manual and in accordance with the operaing condiions speciied. The warranty is void if the
system has been exposed to mechanical impact, chemicals, high humidity, luids, corrosive and hazardous environments or force majeure factors.
If a hardware defect arises and a valid claim is received within the Warranty Period, at its own discreion, “ELDES, UAB” will either (a) repair a
hardware defect at no charge, using new or refurbished replacement parts, or (b) exchange the product with a product that is new or which has
been manufactured from new or serviceable used parts and is at least funcionally equivalent to the original product, or (c) refund the purchase
price of the product.
LIMITED LIABILITY
The buyer must agree that the system will reduce the risk thet, burglary or other dangers but does not provide guarantee against such events.
“ELDES, UAB” will not assume any responsibility regarding personal or property, or revenue loss while using the system.