eldoLED LINEARdrive 720D User Manual

© 2016 eldoLED. All rights reserved. V4.1
More product documentation and eldoLED’s terms and conditions are available at www.eldoled.com.
Quick Start Guide LINEARdrive 720D (LIN720D3)
Connecting and configuring LINEARdrive 720D
A Removing the cover
B Removing the strain reliefs
C Mounting the LINEARdrive
LINEARdrive
Intelligent LED Driver/Controller
IEC61347
EN55015, IEC61003, EN61547
130M
VDC in: SELV equivalent
: 99% typ.
T
a
: -20°C to + 50°C
: +65°C
Tc
LINEARdrive 180D
Ext in +
Ext in
DMX in +
DMX in -
DMX in shield
LedSync thru +
LedSync thru -
LedSync shield
-
TC
1
2
3
Group
Group
Group
Group
LED supply +
4
12-28V / 6A Direct voltage controlled LED driver
TC
Group 1
LINEARdrive 720D
Group 1 GND
Group 2
Group 2 GND
Group 3
Group 3 GND
Group 4
Group 4 GND
Ext in +
Ext in
DMX in +
DMX in -
DMX in shield
LedSync out +
LedSync out -
LedSync shield
-
DALI out -
DALI out +
DALI in -
DALI in +
12-28V / 24A Direct voltage controlled LED driver
ø 4.2 mm / 0.17”
10 mm / 0.39”
30 mm / 1.18”
21.5 mm / 0.85”
110 mm / 4.33”
D Making the wire connections
M
2
1
0.2-1.5 mm
2
2
1
9 mm
0.35 inch
0.5-1.5 mm
2
AWG 20-16
9 mm
0.35 inch
AWG 24-16
VDC and LED connectors:
Other connectors:
DMX in shield
DMX in +
DA +
DA
-
DA +
DA
-
DMX in -
Ext in +
Ext in -
{
12 -48VDC IN
-
+
LedSync shield
LedSync out +
LedSync out -
LED groups
Power
supply
R
R
R
R
LINEARdrive 720D
12-28V / 24W Direct voltage controlled LED driver
TC
Group 1
Group 1 GND
Group 2
Group 2 GND
Group 3
Group 3 GND
Group 4
Group 4 GND
Ext in +
Ext in
-
DMX in +
DMX in -
DMX in shield
LedSync out +
LedSync out -
LedSync shield
DA -
DA +
DA -
DA +
E Fastening the strain reliefs
F Configuring the LINEARdrive
G Replacing the cover
LINEARdrive 180D
Ext in +
Ext in
DMX in +
DMX in -
DMX in shield
LedSync thru +
LedSync thru -
LedSync shield
-
TC
1
2
3
Group
Group
Group
Group
LED supply +
4
12-28V / 6A Direct voltage controlled LED driver
LINEARdrive
Intelligent LED Driver/Controller
IEC61347
EN55015, IEC61003, EN61547
130M
VDC in: SELV equivalent
: 99% typ.
T
a
: -20°C to + 50°C
: +65°C
Tc
CAUTION: The device may only be connected and installed by a qualified electrician. All applicable regulations, legislation and building
codes must be observed. Incorrect installation of the device can cause irreparable damage to the device and the connected LEDs.
All manuals and user guides at all-guides.com

eldoLED LINEARdrive 720D Specifications

General

Brand	eldoLED
Model	LINEARdrive 720D
Category	DC Drives
Language	English