37
CONTROL PANEL: DESCRIPTION
A) PULSE – pulse-mode – mixing in a cycle of 2 s/speed 12 and 1 s/speed 1. Press the (A)
button to start/stop this program. The program does not work at temperatures above
60°C.
B) TURBO – instant maximum speed (12). Press and hold the (B) button to start this
program. Release the button to stop the program. The program does not work at
temperatures above 60°C.
C) Speed – choose the appliance speed. To set the desired speed press the (C) button on
the display (10). The “c” box will start blinking. Use the (+) (-) buttons set the rotational
speed in the range from 1 to 12.
D) Temperature – setting the temperature. To set the temperature press the (D) button.
The “b” box on the display (10) will start blinking. Use the (+) (-) buttons to set the
temperature within the range of 20-120oC:
Use the “+” button to increase of temperature by 10°C. Use the “-” button to decrease the
temperature by 1°C. If this function is active, the (D) button signal lamp is lit
E) Time – setting the timer (range: 1 second to 60 minutes). To set the timer press the (E)
button on the display (10). The “a” box will start blinking.
Use the (+) (-) buttons to set the time:
- from 1 to 59 s: the “+” and “–” buttons change the time in 1 s increments,
- from 1 to 10 min: the “+” and “–” buttons change the time in 30 s increments.
-from 10 to 60 min: the “+” and “–” buttons change the time in 1 min increments.
F) START/STOP button – switching the appliance on and o and resetting the settings.
Press the (F) button and hold it for 2 s to reset the settings.
G) (+) button
H) (–) button
I) “SLOW COOKING” – speed decrease to 100 rpm. This program can be activated only if
the temperature or speed mode is active. Use the (I) button to activate/deactivate this
program. If this program is active, the (I) button signal lamp is lit.
To Next Page
Loading...