Need help? Call 1300 516 248
7
SETTING THE
FORWARD DIRECTION
4.1
1
2
Now go to ‘Settings’ and tap ‘Device’. You should see a change from
auto to an angle between 0° to 360°.
Drive forward until you reach 40km/h and apply the brakes
firmly coming to a full stop.
DEVICE
Angle 180°
IMPORTANT
If this is the first time the Elecbrakes EB2 unit is being used, you will need
to follow the steps below in order to calibrate the forward direction.
During this calibration the Elecbrakes EB2 unit will brake at default
settings.
Setting Up Your Unit
TROUBLESHOOTING:
If the angle does not appear in the app,
repeat step 1 & 2 again prior to troubleshooting
To Next Page
Loading...