Preparing Uint For Use
Install the Lid Knob
Adjust the Height Between Mesh Trays
Mesh Screen or Fruit Roll Sheet
First align the grooves of the lid knob with the 3 square holes of the top cover,
then press the lid knob down until it is correctly locked in place.
The UH0401 food dehydrator allows you to choose from two height settings to accommodate
food of different shapes and sizes.
a. To set it to a lower height, stack the mesh trays in the configuration shown in fig. 1.
The height between two adjacent trays is 1.5cm.
b. To set a higher height, stack the mesh trays in the configuration shown in fig. 2.
The height between two adjacent trays is 2.7cm.
fig.1 fig.2
06
The mesh screen is used for small fruits, vegetables, herbs and other small foods to prevent
them from dropping through the tray as these foods will shrink during dehydration.
The fruit roll sheet is used for making preserved fruit or fruit rolls only.