10 / 18
OFF/ON
Default setting: OFF
LDWS CALIBRATION
NO/YES
Default setting: NO
DEFAULT SETTING
NO/YES
Default setting: NO
FORMAT
NO/YES
Default setting: NO
FIRMWARE VERSION
Default setting: ELB03FMHZDNE.170221.V1.1
After finishing the setting, press to go back to “Recording
pause mode”.
And then press to start “Automatic Recording Mode”.
Audio Recording System
Under the “Automatic recording mode”, if press “down” button,
the audio recording system will pause. And you press “down” button
again, it will start.
Supplement lamp
Under the “Automatic recording mode”, if press “up” button, the
supplement lamp will turn on. And you press “up” button again, it will
turn off.
Automatic Recording
The E6 is automatically configured to start recording anytime the
power is received through the cigarette lighter plug. The camera will
shut off a fe w seconds after power is turned off. It is set to
automatically loop the SD card as well. The previous file will be
automatically overwritten with the newest once the SD card is full.