ELECRAFT K1 - Appendix A K1 Wire Bag Parts List

Appendix A K1 Misc. Bag Parts List
PICTURE Designators Description Part Number
QTY
SPK-J1
2 pin female conn. Housing, 0.1” spacing, locking ramp.
(for speaker) E620021
1
ACC-P1 2.1mm male conn. (mates with DC power jack) E620032
1
ACC-P2
Stereo 1/8” phone plug
(for key, keyer, paddle, computer, or other keying device) E620033
1
Misc Female crimp pins for SPK-J1 E620022
2
Misc Plastic tuning tool, p/n MARS-12 E980012
1
Misc Allen wrench, 5/64", long handled (for large knob) E980004
1
Misc Allen wrench, .05", short handled (for small knobs) E980008
1
Appendix A K1 Wire Bag Parts List
PICTURE Designators Description Part Number
QTY
(ft)
Misc #26 Red Enamel Wire (for toroids) E760002
14
Misc #26 Green Enamel Wire (for toroids) E760004
4
Misc #22 Dual-conductor wire (for speaker) E760012
1
Misc #24 solid-conductor hookup wire, insulated, green E760008
1
Misc Coax, RG174 (for jumper from J9 to J10, RF board) E760010
0.5
Page 2 Misc and Wire