EasyManua.ls Logo

ELECRAFT K4 - Page 103

ELECRAFT K4
132 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
102
AFSK modes use lower sideband by default. This means that the space
tone will appear as lower in frequency on the panadapter and mini-
pan, even though it is higher in audio pitch.)
FSK Polarity
Selects the polarity of FSK keying (via the ACC jack or one of the DTR
serial control lines).
IP Address
The radio's current IP address; used during Ethernet data transfers.
KAT4 ATU Option
Set this to AUTO when the KAT4 ATU is installed.
KPA4 PA Option
Set this to ENABLED when the KPA4 PA option is installed.
KRX4 2ND RX Option
Set this to ENABLED when the KRX4 2nd receiver option is installed.
LCD Brightness
Controls brightness of the LCD.
LED Brightness
Controls brightness of the four front-panel LEDs.
Messsage Repeat Interval
Interval for auto-repeating messages in seconds. (To play a message
with auto-repeat, hold rather than tap an [M1]-[M4] button.)
Mouse Pointer Size, Ext. Mon.
Sets size and other configuration options for mouse cursor on the
external monitor.

Other manuals for ELECRAFT K4

Related product manuals