Electra Bicycle - Service Interval Details

50
51
Appendix D
Fastener Torque Specications
Correct tightening torque of threaded fasteners is very important to your
safety. Always tighten fasteners to the correct torque. In case of a conict
between the instructions in this manual and information provided by a
component manufacturer, consult with your dealer or the manufacturer’s
customer service representative for clarication. Bolts that are too tight
can stretch and deform. Bolts that are too loose can move and fatigue.
Either mistake can lead to a sudden failure of the bolt.
Always use a correctly calibrated torque wrench to tighten critical
fasteners on your bike. Carefully follow the torque wrench manufacturer’s
instructions on the correct way to set and use the torque wrench for
accurate results.
FASTENER RECOMMENDED TORQUE
WHEELS FRONT WHEELS
350~400kg-cm
45~52kg-cm
45~52kg-cm
40~50kg-cm
40kg-cm
40kg-cm
70kg-cm
150kg-cm
70kg-cm
150kg-cm
At Least
167kg-cm
Recommended
Torque
At Least
200kg-cm
300~350kg-cm
250~300kg-cm
39
16
19.6
20
5
5
5
3.9
3.9
6.5
14.5
6.5
14.5
45
29
Nm
Dynamo Front Wheels
REAR WHEELS
9/16” Pedal
M4
M5
M5
M6
M6
M8
M8
M4
PEDALS
SEAT POST
CLAMP
SADDLE
CLAMP
STEERER
CLAMP
HANDLEBAR
CLAMP
HANDLEBAR
CLAMP