52
53
Appendix E
Appendix F
Ticino Handlebar Brake Lever Installation and Setup
Applies to Ticino 20D, 18D, 16D, 8D, LUX
CAUTION! PLEASE READ CAREFULLY AND FOLLOW THESE
INSTRUCTIONS BEFORE RIDING
When setting up the bar-end
brake levers on the Ticino
models identifed above,
ensure that the levers are
positioned almost straight
down under the handlebar
grip. The upward angle of
the brake lever is not to
exceed 10 degrees from
straight down position.
Do NOT position like
conventional brake levers.
Do NOT position as depicted
in photograph on the right.
INCORRECT BRAKE
LEVER POSITION
To Next Page
Loading...
