To Next PageTo Next PageHow to fix CALL function on Electra Intercom System?
If the CALL function isn't working on your Electra Intercom System, it could be due to a missing CD connection at the terminal or an interrupted CD wire. Connect the CD to the terminal or check the continuity of the CD wire from the audio connection box to the terminal.
Crucial safety guidelines to follow during installation.
Step-by-step instructions for installing the supply control unit.
Step-by-step instructions for installing the audio terminal.
Step-by-step instructions for installing the outdoor panel.
Common problems, their signaling, causes, and solutions.
General| Power Supply | 12V DC |
|---|---|
| Type | Audio |
| Category | Kit |
| Wiring | 2-wire |
| Housing Material | Plastic |
