03
Charging is complete when both
the vehicle link indicator and
the LED ring light up green.
You can then disconnect your
vehicle from the charger.
Charging involves connecting your vehicle to the charger, authenticating the charging process, charging your vehicle, and finally
disconnecting your vehicle from the charger. Please make sure that the connected cable is hung carefully back up.
01
Connect your electric vehicle
to the charger. When your
vehicle is detected, the vehicle
link indicator and the ring light
up green.
Using charging cables properly
Do not use charging cables with
adapters of any kind on the
charger. Do not use extension
cords.
02
Plug into the vehicle, the LED
ring and vehicle link indicator
start pulsing blue, and your
vehicle starts to charge. The
blue ring goes out after a few
minutes when you move away
from the charger.
Charging
CHARGING
To Next Page
Loading...