ElectrIQ EIQ-40FHDT2SM User Manual

33 of 34
Multimedia Playback Format
Multimedia
Categories
File Extension
Video
*.avi/MPEG(*.mpeg,*.dat,*vob) / MPEG-4(*.mp4) /
TS(*.ts,*.trp,*tp) / MKV(*.mkv) / *.flv / VC-1 /
WMV9(*.wmv,*.asf) / RMVB(*.rm,*.rmvb)
Music
*.mp3/AAC(*.aac,*m4a)/*.wav
Photo
*.jpg/*.jpeg
Text
*.txt
Remote Control
Signal Type
Infrared
Control Distance
8 meters
Control Angle
30
o
(Horizontal)
Power Supply
AAA 1.5V x 2
TROUBLESHOTING
Problem
Solution
No power
Insert the power plug securely into the power outlet.
No picture
Ensure that the equipment is connected properly.
Distorted or no sound
 Ensure the equipment is connected properly
 Ensure that the input setting for the TV and stereo system are
correct.
 Adjust the master volume to a suitable volume by pressing
V+/V- button.
 Check audio settings are correct.
 Check set isn’t muted.
 Unplug headphones
 Check the antenna connection.
Remote control not working
 Check the batteries are installed with the correct polarities.
 Replace the batteries with new, fully charged ones.
 Point directly at the remote sensor on the TV and try again.
 Operate at a distance of no more than 6m.
 Remove any obstacles between the remote control and the
sensor.
Buttons on the TV don’t do
anything
Disconnect the power plug and then reconnect it. (The unit may not
be operating properly due to lightning, static, or other factors.)
Poor picture or no picture
 Adjust the indoor aerial, use an amplified aerial or external
digital antenna.
 Have the DTV antenna checked or installed by a professional
installer
 Move anything that may cause interference.
 Retry Auto tuning the unit.
 Try another channel.

ElectrIQ EIQ-40FHDT2SM Specifications

General

Brand	ElectrIQ
Model	EIQ-40FHDT2SM
Category	LED TV
Language	English