To Next PageTo Next PageWhy ElectrIQ eiQCURV60SC suction is not good?
If your ElectrIQ Ventilation Hood's suction performance is poor, it could be due to a couple of reasons. First, the grease filters might be clogged, requiring cleaning or replacement. Second, the distance between the unit and the cooking surface might be too great. In this case, adjust the distance to between 70cm and 80cm.
What to do if ElectrIQ eiQCURV60SC has excessive vibration?
Excessive vibration in your ElectrIQ Ventilation Hood can stem from several causes: 1. The fan blade may be damaged. If this is the case, switch off the unit, and have it repaired by qualified service personnel only. 2. The fan motor might not be tightly fixed. Again, switch off the unit, and have it repaired by qualified service personnel only. 3. The unit might not be properly hung on the bracket. To resolve this, take down the unit and check that the bracket is correctly positioned.
How to fix ElectrIQ eiQCURV60SC when light is on but fan doesn't work?
If the light on your ElectrIQ Ventilation Hood is on, but the fan isn't working, it could be due to a couple of reasons. The fan blade might be jammed, in which case you should switch off the unit and have it repaired by qualified service personnel only. Alternatively, the motor might be damaged.
General| Model | eiQCURV60SC |
|---|---|
| Width | 60 cm |
| Number of Speeds | 3 |
| Lighting | LED |
| Noise Level | 63 dB |
| Control Type | Push Button |
| Material | Stainless Steel and Glass |
| Type | Curved Glass Hood |
| Filter Type | Aluminium Grease Filter |
Connects hood to outside via flexible pipe or ducting for air exhaust.
Filters air and expels it through chimney vents using carbon filters.
Provides contact details and website for customer assistance and support.
Guidelines for proper disposal and recycling of electrical waste products.
Instructions on appliance dismantling and end-of-life disposal procedures.
