Why is the ElectrIQ Ventilation Hood suction performance not good?
If your ElectrIQ Ventilation Hood's suction performance isn't up to par, it could be due to a couple of reasons. First, the grease filters might be clogged, in which case you should clean or replace them. Second, the distance between the hood and the cooking surface might be too great. The solution here is to adjust the distance to between 70cm and 80cm.
What to do if my ElectrIQ eiQ52CANGW has excessive vibration?
Excessive vibration in your ElectrIQ Ventilation Hood can stem from a few potential issues. It might be that the fan blade is damaged, or that the fan motor isn't tightly fixed. In either of these cases, switch off the unit and ensure that repair is carried out by qualified service personnel only. Another possibility is that the unit isn't properly hung on the bracket. To resolve this, take down the unit and check whether the bracket is in the correct location.
Why are both the light and fan not working on my ElectrIQ eiQ52CANGW?
If both the light and fan on your ElectrIQ Ventilation Hood aren't working, there are a couple of things to check. First, the halogen light bulb might have blown, so replace it with one of the correct rating. Also, make sure the power cord is securely plugged into the power supply.
How to fix an ElectrIQ eiQ52CANGW Ventilation Hood when the light is on, but the fan does not work?
If the light on your ElectrIQ Ventilation Hood is on but the fan isn't working, the fan blade may be jammed. Switch off the unit and ensure that repair is carried out by qualified service personnel only.
General| Width | 52 cm |
|---|---|
| Number of Speeds | 3 |
| Lighting | LED |
| Noise Level | 62 dB |
| Material | Stainless Steel |
| Control Type | Push Button |
| Voltage | 220-240 V |
| Ventilation Type | Ducted |
Specifies the recommended distance of the cooker hood from the cooking surface for optimal performance.
Provides dimensions for drilling holes in the cabinet for specific cooker hood models.
Details the process of removing the outer glass frame panel for installation.
Explains how to adjust the metal sliders on the sides of the hood body for mounting.
To Next Page
