DANGER
ONLY QUALIFIFED ELECTRICAL PERSONNEL FAMILIAR WITH THE
CONSTRUCTION AND OPERATION OF THIS EQUIPMENT AND THE HAZARDS
INVOLVED SHOULD INSTALL, ADJUST, OPERATE OR SERVICE THIS EQUIPMENT.
READ AND UNDERSTAND THIS MANUAL AND OTHER APPLICABLE MANUALS
IN
THEIR ENTIRETY BEFORE PROCEEDING. FAILURE TO OB_SERVE THIS
PRECAUTION COULD RESULT
IN
SEVERE BODILY INJURY OR LOSS OF LIFE.
WARNING
THE USER MUST PROVIDE
AN
EXTERNAL, HARDWIRED EMERGENCY STOP
CIRCUIT OUTSIDE THE CONTROLLER
CIRCUITRY
THIS CIRCUIT MUST DISABLE
THE SYSTEM
IN
CASE OF IMPROPER OPERATION. UNCONTROLLED MACHINE
OPERATION
MAY
RESULT IF THIS PROCEDURE IS NOT FOLLOWED. FAILURE TO
OBSERVE THIS PRECAUTION COULD RESULT
IN
SEVERE BODILY INJURY.
Copyright© Reliance Motion Control, Inc. 1995. All rights reserved.
The information contained in this manual
is
subject
to
change without notice.
Electro-Craft is a registered trademark
of
Reliance Electric Company
or
its subsidiaries.
Tandy is a registered trademark
of
Tandy Corporation.
IBM is a registered trademark
of
International Business Machines Corporation.
INTEL
is
a trademark
of
Intel Corporation.
AMP is a trademark
of
AMP Incorporated.
Molex
is
a registered trademark
of
Molex Incorporated.
(
(
(
To Next Page
Loading...
