Electro-Harmonix MOD 11 User Manual

1
MOD 11
Multifunction Digital Modulation
Congratulations on your purchase of the Electro-Harmonix MOD 11, the
compact digital modulation pedal that does it all. From classic modulation
sounds to retro-inspired simulations, the MOD 11 features eleven distinct
modulation effects. The MOD 11 is designed to be simple to use for those
looking for fast, plug-and-play ability, but it also features deeper
functionality for players who want more control over their modulation
effects. Tap tempo, multiple LFO shapes, envelope controls, and
momentary mode are just a few examples of deeper options available on
the MOD 11. From simple, subtle warbles to out-of-this-world special
effects, the MOD 11 has got all of your modulation needs covered.
- TABLE OF CONTENTS -
Descriptions of Modulation Types 2
Connections 3
Controls 3
Mode Button Functionality 4
Footswitch Functionality 5
Secondary Knob Functionality 7
LFO Shapes & Envelopes 11
Filter Matrix Mode 13
Summary Chart 14
FCC Compliance 15
Warranty Information 16

Electro-Harmonix MOD 11 Specifications

General

Current Draw	150mA
Effects	Chorus, Rotary, Flanger, Tremolo, Vibrato
Inputs	1 x 1/4" (instrument)
Outputs	1 x 1/4"
Power Supply	9V DC power supply (included)
Bypass	Buffered

Summary

Descriptions of Modulation Types

Connections

INPUT Jack

1/4" audio input jack for the MOD 11. Input impedance is 1MΩ.

OUTPUT Jack

1/4" audio output jack for the MOD 11. Output impedance is 680Ω.

TAP IN Jack

1/4" jack for an external momentary footswitch to control modulation speed via tap tempo.

9V Power Jack

Jack for connecting the EHX 9.6DC 200mA AC adapter for power.

Controls

DEPTH Knob

Sets effect depth/intensity. For Rotary, sets drum/horn signal balance.

RATE Knob

Sets modulation speed. Minimum may enter Filter Matrix Mode.

VOLUME / COLOR Knob

Sets volume or feedback/resonance/center pitch/resonance depending on effect.

Modulation Type Knob

11-position rotary switch to select active modulation type.

MODE Button

Cycles through available modes of the active modulation type. LED indicates current mode.

Mode Button Functionality

Footswitch Functionality

TAP TEMPO

Sets quarter-note modulation speed by tapping. Can use built-in or external switch.

Secondary Knob Functionality

Using Secondary Knob Mode

Enter mode by holding MODE button to edit secondary functions via RATE/VOLUME/COLOR knobs.

Controls in Secondary Knob Mode

DEPTH/MODULATION TYPE knobs function normally. RATE/VOLUME/COLOR knobs edit secondary parameters.

LFO Shapes & Envelopes

LFO Shapes

Describes Sine, Triangle, Rising Sawtooth, Falling Sawtooth, and Square LFO shapes and their characteristics.

Envelopes