Electro-Voice Precision P2000 User Manual

General introduction and key features of the EV PRECISION SERIES amplifier.

Explanation of all front panel controls, indicators, and their functions.

Details on input/output connectors, wiring, and input routing modes.

Description of output connectors, limiter, HI-LO-CUT filter, and groundlift switch.

Summary of key technical performance data and electrical characteristics.

In-depth technical data including power supply, input, and output characteristics.

Details on stabilization, frequency response, impedance, non-linearities, and crosstalk.

Damping factor, slew rate, noise levels, dimensions, and weight specifications.

Visual representation of the amplifier's internal functional blocks and signal flow.

Technical drawings showing the unit's physical size and mounting information.

Measurement conditions, power supply details, and power consumption.

Procedure for adjusting the idle current for both amplifier sides.

Procedures for adjusting floating symmetry and VCA-offset.

Tests for front panel indicators, output offset, and limiter functionality.

Testing protection circuits, fan control, power-on delay, and signal integrity.

Testing DC/RF protection circuits and input routing/mode switch functions.

Testing bridged mode, ground lift switch, and amplitude non-linearities.

Specifications and testing for noise, damping, slew rate, and factory presets.

List of electronic components and mechanical parts with their respective part numbers.

Continued list of transistors, diodes, ICs, and resistors with part numbers.

Further listing of transistors, switches, and resistors with their part numbers.

Details on resistors, shorting plugs, and transformers with their part numbers.

Warnings regarding electrical hazards and guidelines for qualified service personnel.

Information on how to order parts and the terms of the limited warranty.

How to obtain technical support and contact Electro-Voice for assistance.