Need help?Do you have a question about the Electro-Voice Precision CP3000S and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Damping Factor | >300 |
| Input Connectors | XLR, 1/4" TRS |
| Frequency Response | 10 Hz ... 40 kHz |
| Total Harmonic Distortion (THD) | <0.05% |
| SMPTE-IMD | <0.05% |
| DIM30 | <0.05% |
| Input Impedance | 20 kOhms |
| Output Connectors | Speakon |
| Protection | Thermal, DC, HF, Back-EMF, Peak Current Limiters |
| Cooling | Front-to-rear, 3-stage fans |
| Dimensions (H x W x D) | 483 mm |
| Weight | 35 lbs (15.9 kg) |
Details on unpacking the amplifier and warranty information.
Guidelines for properly installing the power amplifier in a rack or cabinet.
Compliance information for US users regarding radio frequency interference.
Details on the electronically balanced XLR inputs for channels A and B.
Describes the parallel input routing mode for channels A and B.
Explains the dual input routing mode for independent channel amplification.
Details on the SPEAKON connectors for channel outputs and bridged output.
Instructions for operating the amplifier in bridged mode for increased output.
Explanation of the ground-lift switch for eliminating noise loops.
Information on the mains power input connection and fuse replacement.
To Next Page