Need help?Do you have a question about the Electro-Voice Precision P1200RL and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Signal to Noise Ratio | > 105 dB |
| Total Harmonic Distortion | < 0.05% |
| Damping Factor | > 300 |
| Input Sensitivity | 1.4 V |
| Cooling | Variable speed fan |
| Rackmount Size | 2U |
| Input Impedance | 20 kOhms (balanced), 10 kOhms (unbalanced) |
| Dimensions | 483 x 88 mm |
| Weight | 35 lbs (15.9 kg) |
Describes the POWER, STANDBY, and PROTECT indicator LEDs.
Explains the OUT, 0 dB, and LIMIT LEDs related to audio signal levels.
Details on input connections and parallel loop-through options.
Describes the DSP output signal and programmable control ports.
Recommendations for low-frequency signal connection using balanced cables.
Details on CAN-bus network topology and connections for remote control.
Wiring diagrams for basic (5 amps) and medium (2 racks) network configurations.
Technical details on CAN-bus data rates, bus lengths, and cable requirements.
Tables detailing power supply and cabling requirements for operation.
Data on power dissipation and heat output for thermal management.
Key electrical specifications including power, voltage, distortion, and noise.
Input signal parameters, CMR, and comprehensive DSP functions.
To Next Page
