Electro-Voice Contractor Precision CPS2T User Manual (English)

To Next Page

CPS2T CONTRACTOR PRECISION SERIES

Features

• 2 x 600 watts output power capacity

• floating 100 V / 70 V / 25 V power outputs (isolated outputs)

• low impedance outputs (direct outputs)

• bridged mode operation, switchable

• mains supply 120V / 230 V AC 50/60 Hz

• POWER REMOTE function

• service mains switch

• active ventilation via 2 temperature-controlled DC-fans

• electronically balanced inputs

• routing switch for parallel linked operation

• input gain controls

• integrated audio limiters

• power-on switching noise suppression

• protection circuitry: DC/HF, Back-EMF, output voltage overload limiters, initial inrush current limiter,

output peak current limiter, output transformer saturation protection (TSP)

• 18 dB/oct. HPF filter at 45 Hz

• SIGNAL and LIMIT indication for optical monitoring

• thermal overload protection for the heat sink and the internal power supply, with PROTECT-function

• input transformers for balanced, floating operation are optionally available

• XLR-type and binding post clamping input connectors

• 19" frame size, 3 RU

OWNER’S MANUAL

BEDIENUNGSANLEITUNG

Other manuals for Electro-Voice Contractor Precision CPS2T

Need help?

Do you have a question about the Electro-Voice Contractor Precision CPS2T and is the answer not in the manual?

Power Output

continuous rated output power dual mode 4 ohms	500 watts
continuous rated output power bridged mode 8 ohms	1, 000 watts
continuous rated output power dual mode 8 ohms	300 watts
transformer-isolated outputs dual mode	500 watts at 25 V, 70 V, or 100 V
continuous rated output power dual mode 4 ohms 1 kHz	600 watts
continuous rated output power bridged mode 8 ohms 1 kHz	1, 200 watts
continuous rated output power dual mode 8 ohms 1 kHz	330 watts
transformer-isolated outputs dual mode 1 kHz	590 watts at 100 V
transformer-isolated outputs bridged mode	1, 180 watts at 200 V

Voltage and Gain

maximum rms voltage swing direct outputs	52 Volts
maximum rms voltage swing transformer-isolated outputs	121 Volts at 100 V
voltage gain direct outputs	30 dB
voltage gain at 100 V	42 dB
voltage gain at 70 V	39 dB

Frequency and Distortion

frequency response direct outputs	45 - 30, 000 Hz
frequency response transformer-isolated outputs	45 - 22, 000 Hz
total harmonic distortion direct outputs	<0.05%
total harmonic distortion at 100 V	<0.1%
total harmonic distortion at 70 V	<0.2%

Physical Dimensions

Electrical

operating voltage	120, 230 V, 50/60 Hz ac
power consumption	870 watts
input sensitivity dual mode 4 ohms	0 dBu (775 mV)
maximum input level	+20 dBu (7.75 V)
input impedance balanced	20, 000 ohms