Need help?Do you have a question about the Electro-Voice ELETRO-VOICE CPS2.12 and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Output Power (8 ohms, Bridged) | 1600 W |
| Voltage Gain | 32 dB |
| Output Power (2 ohms) | 1200 W |
| Output Power (4 ohms) | 800 W |
| Output Power (8 ohms) | 450 W |
| Input Impedance | 20 kOhms |
| Input Impedance (unbalanced) | 10kΩ |
| Cooling | Variable-speed fan |
General welcome message and encouragement to read the manual.
Instructions for carefully opening packaging and inspecting the amplifier for transit damage.
Lists the items included in the package and information regarding the warranty.
An overview of the amplifier's capabilities, efficiency, and protection features.
Details the user's responsibilities regarding speaker system damage and electrical safety.
Identifies and describes the front and rear panel controls, indicators, and connection ports.
Information on the required mains voltage and connection to the power supply.
Details the function of the mains switch, including soft start and power-on delay.
Guidance on how to properly mount the amplifier in a standard 19-inch rack case.
Instructions for ensuring adequate airflow and cooling for the amplifier.
Explanation of the ground lift switch and its use in preventing noise loops.
Details on the 50 Hz High Pass Filter and its function for audio signals.
Information on selecting the power on delay time using the rear panel switch.
How to select the operating mode (DUAL, PARALLEL, BRIDGED) and connect speaker outputs.
Guidance on connecting balanced and unbalanced audio input signals to the amplifier.
How to adjust the amplification level for each channel using the rear panel controls.
Explanation of the meaning and function of the various LEDs on the front panel.
Details on activating standby mode and remote power control via the POWER REMOTE port.
Description of the amplifier's temperature-controlled, three-stage fan cooling system.
Details on the RCM-810 module for remote control, monitoring, and system integration.
Data tables detailing power consumption, output power, and heat dissipation under various conditions.
A visual representation of the amplifier's internal signal flow and component structure.
Technical drawings showing the physical dimensions and mounting details of the amplifier.
To Next Page