Need help?Do you have a question about the Electro-Voice AP2200 and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Voltage Gain | 32 dB |
| Input Impedance | 20 kOhms |
| THD at rated output power (MBW = 80 kHz, 1 kHz) | < 0.03 % |
| S/N Ratio (A-weighted) | > 105 dB |
| Protection | DC |
| Cooling | Variable speed fan |
| Power Requirement | 100-240V, 50/60 Hz |
| Total Harmonic Distortion | < 0.03 % |
| Signal to Noise Ratio | > 105 dB |
| Weight | 37.9 lbs |
Details the Electro-Voice AP2200 dual-channel power amplifier's design for direct voice-coil drive and 70-volt systems.
Technical specifications including power output, configuration modes, cooling system, and input modules.
Guarantees products against malfunction due to defects in materials or workmanship for a specified period.
Procedure for obtaining warranty service, including necessary documentation and contact information.
Detailed mapping of pin numbers to their specific functions and signal types for input cards.
Illustrates the rear panel layout, including input, output, and load select connections.
Diagrams showing different operating modes: Dual, Parallel Mono, and Bridge Mono.
Comprehensive technical data including power bandwidth, voltage gain, sensitivity, and physical dimensions.
Table detailing line current, power consumption, and thermal dissipation for various applications.
To Next Page