Need help?Do you have a question about the Electro-Voice Sb 180 and is the answer not in the manual?
General| Brand | Electro-Voice |
|---|---|
| Model | Sb 180 |
| Category | Subwoofer |
| Language | English |
Details the Electro-Voice Sb180's unique SubScoop cabinet, EVX-180B woofer, and hybrid horn-vented design for enhanced bass.
Explains how paralleling Sb180 units increases acoustic output and power handling through mutual coupling effects.
Recommends active crossovers (12-dB/octave, 100-250 Hz) and amplifiers up to 1,200 watts for optimal Sb180 performance.
Advises using a 32-Hz high-pass filter to protect the Sb180 from cone excursion below box-tuning frequency.
Details the axial frequency response measured in an anechoic environment from 40-250 Hz.
Describes the rugged, void-free plywood construction, steel grille, rubber feet, and handles for durability.
Covers the Neutrik Speakon NLAMPR-V connectors for high-current delivery and wiring recommendations.
Explains the use of the 13/8-inch stand mount for satellite systems, with safety recommendations.
Informs about front woofer access for service and availability of service data sheets.
Details the ANSI/EIA RS-426-A power rating, including test voltage and peak power handling.
Specifies horn-loaded design, EVX-180B woofer, frequency range (33-250 Hz), and SPL capabilities (128 dB avg, 135 dB peak).
Details enclosure materials, dimensions, weight, and the 13/8-inch stand mount for satellite systems.
Guarantees against defects in materials/workmanship for a specified period, with repair/replacement options.
Outlines the process for obtaining warranty service, including product delivery and proof of purchase.
Specifies warranty exclusions like exterior finish, misuse, and unauthorized repairs.
Lists typical frequency response, low-frequency limits, efficiency, power handling, and acoustic output.
Provides sensitivity (99 dB) and distortion levels for second and third harmonics at 100 Hz.
Identifies the EVX-180B transducer and the box tuning frequency of 38 Hz.
Recommends crossover frequency (250 Hz or below) and slope (12 dB/octave), and lists impedance (8 ohms nominal).
Details Neutrik Speakon connectors, stand mount, enclosure materials, grille, and dimensions.
Specifies the net weight of 46.3 kg (102lb) and shipping weight of 50.9 kg (112 lb).
To Next Page
