Need help?Do you have a question about the Electro-Voice SbA750 and is the answer not in the manual?
General| Nominal Impedance | 8 ohms |
|---|---|
| Enclosure Material | Plywood |
| Enclosure Type | Bass Reflex |
| Type | Subwoofer |
| Driver Size | 18 inch |
| LF Transducer | 18-inch |
| Connectors | XLR |
| Height | 700 mm |
| Width | 523 mm |
| Depth | 640 mm |
| Weight | 55 kg |
Details on how to unpack the unit and process warranty claims.
Guidance on placing and connecting the SbA750 for safe and proper operation.
Describes the balanced inputs for connecting signal sources like mixers.
Explains the function of parallel outputs for signal pass-through.
Details outputs for mid-high range signals to external cabinets.
Sets the output volume of the SbA750, ranging from -∞dB to +10dB.
Information on Signal, Limit, VCP, and Protect indicator lights.
How to operate the power switch and connect AC power via PowerCon.
Details on the AC fuse and the PowerCon connector for power supply.
Recommended use of balanced phone or XLR cables for signal input.
Illustrates expanding a power mixer with the SbA750 as an add-on.
Setup for stereo 2-way active operation using one mono subwoofer.
Using a second SbA750 for improved bass SPL in a stereo setup.
Using two SbA750s to expand an existing full-range stereo PA system.
Connecting SbA750 with SxA250 or other active cabinets.
To Next Page
