Need help?Do you have a question about the Electro-Voice SbA760 and is the answer not in the manual?
General| Driver Size | 15 in |
|---|---|
| Maximum SPL | 129 dB |
| Weight | 61.7 lbs (28 kg) |
| Dimensions (H x W x D) | 22 in x 21.5 in x 24 in |
| Nominal Impedance | 8 Ohms |
| Impedance | 8 Ohms |
| Enclosure Material | Plywood |
| Driver | 15" Woofer |
| Input Connectors | XLR |
| Connectors | 2 x Neutrik NL4 |
| Enclosure Type | Bass-reflex |
| LF Transducer | 15" Woofer |
Details on removing the product from packaging and filling out the warranty card for claims.
Guidance on correctly placing and connecting the SbA760 for safe operation and reliable power supply.
Describes the balanced inputs for connecting audio sources like mixers and signal processors.
Sockets for carrying through input signals to other devices or systems.
Outputs for high-frequency signals, used for distribution to mid-high cabinets.
Control for adjusting the output volume of the SbA760, ranging from -∞dB to +10dB.
Information about the operational state of the SbA760's internal power amplifier.
AC switch for turning the SbA760's power ON or OFF, with an indicator light.
Location and handling of the mains fuse, which blows during malfunctions.
PowerCon socket for connecting additional cabinets like SxA360.
PowerCon connector for establishing the mains AC connection to the unit.
Recommendations for using balanced cables for connecting signal sources to prevent noise interference.
Illustrates the easiest way to expand a power mixer system using the SbA760 subwoofer.
Details on feeding only Mid/High signals to full-range cabinets for higher acoustic output.
Shows a full stereo setup where a second SbA760 improves bass range SPL.
Using two SbA760s to expand an existing full-range system in a stereo setup.
Demonstrates SbA760 in combination with other active cabinets like the SxA360.
To Next Page
