EasyManua.ls Logo

Electro-Voice SxA180 User Manual

Electro-Voice SxA180
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
ELECTRO-VOICE
®
Owner’s Manual
S
x
A Series
Powered Loudspeakers
Owner’s Manual
SxA100+
SxA250
SxA180

Other manuals for Electro-Voice SxA180

Question and Answer IconNeed help?

Do you have a question about the Electro-Voice SxA180 and is the answer not in the manual?

Electro-Voice SxA180 Specifications

General IconGeneral
Frequency Response (-10 dB)45 Hz - 20 kHz
Coverage (Nominal -6 dB) H90°
Crossover Frequency1.8 kHz
Nominal Impedance (Passive)8 Ohms
Input ConnectionsXLR/TRS combo
Enclosure MaterialPolypropylene
Frequency Response45 Hz - 20 kHz
Coverage (Nominal -6 dB) V60 degrees
LF Transducer1 x 18" (457 mm) woofer
Input Connectors1 x XLR, 1 x 1/4" TRS
Weight41 kg (90.4 lbs)

Summary

Important Safety Instructions

General Operating Safety

Essential safety guidelines for operating the Electro-Voice SxA series loudspeakers.

Service Safety Guidelines

Safety guidelines for qualified personnel performing servicing on Electro-Voice SxA loudspeakers.

US and Canada Grounding Plug

Information regarding the grounding-type plug for US and Canadian models.

Safety First

Setup and Use Precautions

Guidelines for safe setup, installation, and operation of SxA speaker systems.

Suspension and Environmental Warnings

Warnings regarding speaker suspension and exposure to moisture or high humidity.

Hearing Protection Advisory

Cautionary advice on preventing hearing damage from high sound pressure levels.

Product Overview

Description and System Features

Covers the SxA series overview, two-way system features, and SxA 180 woofer features.

System Setup

Power and Connection Guidelines

Instructions for connecting power cords and ensuring proper power source compatibility.

Initial Power-On and Aiming

Procedure for powering on the system and optimizing sound quality through speaker aiming.

Setup Diagrams for SxA Two-Way Systems

Microphone Input Connection

Diagram and steps for connecting a microphone to the SxA two-way system.

Line Input Connection

Diagram and steps for connecting line-level sources via XLR or 1/4-inch connectors.

SxA Two-Way System Setup (cont.)

Balancing Inputs and Troubleshooting

Guidance on balancing microphone and line inputs and basic troubleshooting steps.

Cascading Systems and Power Down

Instructions for cascading multiple SxA systems and safe power-down procedures.

SxA180 Woofer System Setup

Woofer Power and Input Connection

Steps for connecting power and line-level input to the SxA180 woofer.

Woofer Output Configuration

Guidance on using high-pass vs. full-range outputs for optimal system integration.

SxA180 Woofer System Setup (cont.)

Crossover Frequency and Level Adjustment

Instructions for adjusting the woofer's level control and crossover frequency.

SxA180 Woofer System Setup (cont.)

Cascading Signal in Multiple Box Hook Up

Diagram illustrating how to cascade the signal to multiple SxA180 woofer units.

Using Two-Way SxA Systems as Floor Monitors

Floor Monitor Configuration

Instructions for using SxA two-way systems as floor monitors, including adapter installation.

Electro-Voice® Uniform Limited Warranty

Warranty Terms and Conditions

Details on warranty coverage, exclusions, limitations, and how to obtain service.

Service and Repair Information

Addresses and contact information for product service and repair.

Notes

Related product manuals