EasyManua.ls Logo

Electro-Voice X-Array XF - Rigging Hinge Types and Installation

Electro-Voice X-Array XF
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Xf Two-Way, MB/HF System
Xf Two-Way, MB/HF System
9
Figure 5 - Distortion
Distortion for the Xf was measured on axis
in the far field in an anechoic environment
with an input signal that would result in a
sound pressure level of 115 dB at one meter.
The Klark Teknik DN8000 digital electronic
unit was used to provide the necessary cross-
over filters, equalization and time delay. A
frequency spectrum typical of close-miked
rock music was employed. The sound pres-
sure level was normalized for an equivalent
one-meter distance. Plots of second and third
harmonic distortion are shown referenced to
the fundamental.
Figure 6 - Impedance
The impedance of each frequency band of
the Xf was measured in an anechoic envi-
ronment.
Fundamental
2nd Harmonic
3rd Harmonic
HF
MB

Other manuals for Electro-Voice X-Array XF

Related product manuals