ELECTROCOMPANIET ECI 6 User Manual

13
ENG
Remote control
MENU
USB
COAX1
AMP
COAX2
TOS
Link 2
TOS
Link 1
TOP MENU SETUP
S.MODE
1
2
3
4
5
6
7
8
9
1. Mute - on/off.
Standby mode - hold mute1-2 sec. to set
the ECI 6 into a standby mode.
2. CD - switch to CD input
3. AUX - switch to AUX input.
4. Standby - not in use with the amplifiers.
Work as Standby with a players.
5. Dim - dimming the amplifiers display.
6. DVD - switch to DVD input
7. Volume up - increase the volume.
8. Volume down - decrease the volume.
9. HT - switch to a Home theater input.
Replacing batteries
Use 2pcs AAA or LR03 batteries.
Observe correct polarization when
inserting batteries. Please remove
batteries when the remote is not used
for a prolonged period of time.
Using the remote
When using the remote control, the
front end of the remote control should
be pointed to the front panel of your
ECI 6. A free line of sight is required
between the remote and the infrared
sensor on the front pane

ELECTROCOMPANIET ECI 6 Specifications

General

Brand	ELECTROCOMPANIET
Model	ECI 6
Category	Amplifier
Language	English